How to Clean Porcelain and Ceramic Tile Floors

Investing on a tile floor is the best idea and especially if you are one with cleanliness as one of your traits. Tile floor can never hide any dirt. Instead, it reveals every speck of dust, spills, or even pet mess to notice immediately, which is more reason to keep it clean.

Since there are different kinds of tile floors, the methods of cleaning them also vary. Read on to find out how to clean porcelain and ceramic tile floors like a pro to maintain a shiny and new look.

Cleaning Porcelain and Ceramic

Porcelain and ceramic are almost the same, and most people cannot tell them apart. Since they both created the same, cleaning them is neither different.

#1 Vacuum Cleaning

Using the right vacuum cleaner for tile floors, vacuum your tile floor regularly to remove debris, dust, and especially grit which can scratch the floor.

#2 Mopping

Use the best tile cleaner or cleaning solution to avoid leaving residue by using the wrong detergents.

Use a tile floor mop or rag to mop the floor. Refrain from using a sponge mop even though it would seem the best to use because it quickly sends dirty water to the grout areas, leaving them dirtier.

While mopping, you will avoid leaving streaks or haze on the floor by changing cleaning water often to make sure the water you are using is clean. Also, make sure to squeeze out excess water from the mop to use it while damp, which is one reason for a shiny floor.

#3 Dry the Floor

If for some reasons you floor is overly wet after mopping, probably from using a wet mop, you need to dry it using a clean, dry mop or a lint-free cloth. You need to do that to avoid your floor drying while leaving spots of dried water.

#4 Removing Stains

Removing stains from a tile floor is not challenging, as it might be with other types of surfaces. With the right stain removing solution, you will not need to use much force to remove the stain.

It is essential to deal with the stain immediately as it appears to avoid setting in. Set it stains are a challenge to remove. Therefore be quick to work on it as soon as possible.

#5 Cleaning Grout

No matter how clean your tile floor might be, dirty grouts will let it down to appear old and drab. Unlike tiles that can resist dirt, grout absorbs it due to its permeability and thus gets dirty and stained quickly.

Remove any surface dirt and grime by wiping the grout area first with plain warm water. Next, while using a grout cleaning solution, spray it, or splash it on the grout and let it sit for about five minutes. Using a soft-bristle brush, rub it gently to remove the ground in the dirt while being careful not to damage the grout.

Wipe out the dirt using warm water and a clean towel to rinse it out. Dry it the area using another clean cloth and leave to air-dry completely.

#6 Sealing Grout

When a grout gets stained, it means it is not well sealed. Probably it had a seal which has come off over time and use.

After the floor and the grout area are dry, you need to apply a unique grout sealer which is silicone-based. You will, therefore, prevent your tile floor grout from staining and getting dirtier quickly.

Final Word

Mastering the mentioned cleaning techniques, you have now attained a pro standard on how to clean a tile floor. You will not only clean to maintain a clean and shiny tile floor but one that will remain looking new for a very long time.

Source: https://www.irvingsplumbing.com/

Ramparts

Leave a Reply

Your email address will not be published. Required fields are marked *